Sonyericsson K800i setool2 unlock
From CPKB - Cell Phone Knowledge Base
Unlock Sonyericsson K800i ( K800 ) using setool2 software
Contents
Notes
- This method will not erase any user data.
- This method will set phone code (security code) back to "0000".
- Flashing software on phone will set back original simlock. (Phone will be locked again.)
- It will not consume credits (will not cost money)
What You need?
- Se tool box 3 device for running setool2 software
- Installed Sonyericsson K800i CSCA drivers
- Sonyericsson DCU-60 data cable
- A SIM card that is accepted by the mobile phone
How to unlock Sonyericsson K800i using setool2?
Identifying phone
- Connect setool3 dongle and DCU-60 cable and start setool2 software
- Select "K800" in "Sonyericsson" tab, "USB" as interface, and "921600" as speed
- Click on "Identify" button
- While pressing "c" (clear, delete) button, connect the Sonyericsson K800(i) mobile phone to DCU-60 cable.
- Setool2 will read phone data.
- Disconnect mobile phone, remove then insert battery
- If You see "Restoration file present for detected firmware" then You don't have to download restoration file.
Making the settings and unlocking Sonyericsson K800i (K800)
- Go to "Settings" tab and tick the checkboxes as shown in the picture: (After that You may click on "Save" to save those settings)
- Go back to "SonyEricsson" tab, and click on "Unlock/Repair"
- While pressing "c" (clear, delete) button, connect the Sonyericsson K800(i) mobile phone to DCU-60 cable.
- After a while, the progam will ask to remove phone from cable, put simcard in phone, turn it on, connect to computer using DCU-60 USB datacable, and when phone asks, choose "Phone mode". Wait till Setool2 detects the port, installs "executor" java program on phone, and runs it. Phone will turn off.
- Now Setool2 asks to remove cable and battery from phone, insert battery back, and press "Ready" button.
- While pressing "c" (clear, delete) button, connect the Sonyericsson K800(i) mobile phone to DCU-60 cable.
- After a while You will see "Unlock FINISHED". Now Your phone is simlock - free.
- Delete "executor" java program from the "Games" menu. ( It isn't needed, but if You run "executor", the phone can't be turned on, and flashing needed to revive it.)